VVDI2 program key correct mileage for VW Audi Skoda review

Hi, share my experience here. I bought VVDI2 Commander from uobdii.com last month. I have used it to make many keys for VW, Audi and Skoda cars, and it also correct mileage well. Following are what I tested OK for your reference!



I added these keys experience with VVDI2 Key Programmer:
Added a key bcm2 on a 2013 Audi A5 worked flawlessly.
Add a spare key Audi BCM2 by OBD worked fine.
A6/Q7 EZS Kessy:
Added a dealer key (remote source from the dealer) without issues, seemed to read everything properly but I had a working key to begin with.
Audi A6:
Tested with A6 read kessy working, learned new key
Skoda Octavia 2006:
Got CS & PIN, programmed key fine.
VW Passat B5:
Pulled PIN and programmed key ok.
VW Passat B6 2009:
Pulled PIN but couldn’t get 6 bytes CS, needed comfort dump.
VW Transporter T5 2006:
Pulled PIN Programmed key, no remote programming.

I use VVDI2 to change mileage on following cars:
Audi A4 2006:
Mileage correction success
2007 Audi A4 B7 RB8 crypto
Mileage correction ok
VW Passat B5:
Corrected miles ok

From UOBDII Official Blog, post VVDI2 program key correct mileage for VW Audi Skoda review

Free download V1.2.2 Xhorse VVDI 2 Commander Key Programmer

Here comes a fresh update for Xhorse VVDI 2 Commander Key Programmer. Now the newest software version is V1.2.2. This blog will offer you free download link and update information.



VVDI 2 Key Programmer V1.2.2 Installer Free Download Link:
https://mega.nz/#!7sAC1BKQ!wbye-88VPEU6oRPmaws6O4MPGrzeCyO7Oy31uYo1vSU

VVDI 2 Commander V1.2.2 Update Information (2016-10-27):
Require firmware V2.2.2
VAG V1.2.2

1. Bugfix
   BMW V1.2.2
2. Bugfix
   Porsche V1.2.2
3. Bugfix
   PSA V2.0.4
4. Bugfix Transponder Programmer V1.2.2
5. Support copy transponder: HITAG2 (46), 11, 12, 13, 7935(ID42)
   2. Immobilizer data tool: bugfix BMW motorcycles
   3. Bugfix J2534 V1.2.2
6. Bugfix
   Online Upate Tool V1.2.2
7. Bugfix
   Quick Start V1.2.2
8. Bugfix

From UOBDII Official Blog, post Free download V1.2.2 Xhorse VVDI 2 Commander Key Programmer

VVDI2 BMW change mileages on F series

Here you will learn how to change mileages for BMW Ｆ-Series(CAS4 system) using Xhorse VVDI2 BMW commander

setup in VVDI2 software:

1) Write down the KM shown in instrument, take instrument away from car, avoid synchronize KM with CAS

2) et CAS KM to 0km (Change KM with File Change KM, select type with mask, support 1L15Ymask and 5M48H mask)

3) Read instrument EEPROM dump with BDM programmer

4) Select File Change KM ->F-Series Instrument and load EEPROM dump saved in step 3) (PICTURE 8.3)．

5) Input new KM

6) Press button “Change KM” and save new EEPROM dump

7) Write new EEPROM dump to instrument

8) Put your instrument in car

9) Finished