VVDI2 make range rover sport key & CEM read ok

VVDI 2 Feedback:  06 range rover sport CEM read ok, made a key with VVDI2 immo data tool.. Great!

Confusion and solution: 

Confusion: I did one of these but now how do i add a remote key .. i tried with skp900 to add pcf7941 but it didn’t work.. Is it possible to add a remote key? And how please
Solution:
If you reset a PCF, you no longer have an option to go back to life, you need a lot of information to be able to use it again, you need flasheROM and eep-extended, it does not only work with hitag pages.
Another option is that they (Xhorse) can give, is to create a firmware download as BMW, for other models
And I think that option will not be available, because to do so removed the vvdi-tools
Another option is someone who passes the firmware for the pcf and remote you need. that option I think no one will give it freely.
What you have left is to leave the PCF blank and your investigate.
If for some reason a manufacturer makes the mistake and does not block the PCF and you are lucky to take that full firmware already have an option for your investigation.
I would also be interested in your firmwar.

Article form key cutting

06 range rover sport CEM read ok, made a key with VVDI2 immo data tool great

Xhorse VVDI 2 V4.1.0(2017-03-17) free download and update

original Xhorse VVDI 2 Feedback:  06 range rover sport CEM read ok, made a key with VVDI2 immo data tool.. Great!

Confusion and solution:

Confusion: I did one of these but now how do i add a remote key .. i tried with skp900 to add pcf7941 but it didn’t work.. Is it possible to add a remote key? And how please

Solution:

If you reset a PCF, you no longer have an option to go back to life, you need a lot of information to be able to use it again, you need flasheROM and eep-extended, it does not only work with hitag pages.
Another option is that they (Xhorse) can give, is to create a firmware download as BMW, for other models
And I think that option will not be available, because to do so removed the vvdi-tools
Another option is someone who passes the firmware for the pcf and remote you need. that option I think no one will give it freely.
What you have left is to leave the PCF blank and your investigate.
If for some reason a manufacturer makes the mistake and does not block the PCF and you are lucky to take that full firmware already have an option for your investigation.
I would also be interested in your firmware :-)

How to: VVDI 2 make a spare key on A6L / Q7/ EZS-Kessy (JB18)

This is generally the procedure to use VVDI2 to make a spare key for A6L / Q7/ EZS-Kessy (JB18).

. VVDI 2 -> Key Learn -> 4th Immobiliser System Audi -> A6L / Q7/ EZS-Kessy (JB18)

. Read note: Most cars before 2009 use 9S12DT128 chip and cars after 2009 use 9S12DT(G)256

. Choose appropriate chip above -> Read J518 EEPROM with Working Key -> Write down CS and Pin on a piece of paper -> Save EEPROM

. Type CS and Pin into VVDI 2 -> Type “2” for Number of keys to learn -> Insert 8E chip into VVDI 2 ->Select Make Dealer Key -> Select Key Learning

. Insert dealer key into car and switch on for 2 seconds. Then put second key into ignition within 5 seconds. Then press okay after keys are learned.